Titanium Plate

Product details;
There are two standards for titanium plates, the national standard is GB/T3621-2007 GB/T13810-2007, The American standard is ASTM B265 ASTM F136, ASTM F67, AMS4928.
1. Brand number
American standard brand: GR1, GR2, GR3, GR5, GR7, GR12
Russian tag numbers: BT1-00, BT1-0, fBT1-2, etc
Domestic brand: TA0, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4
2. Reference standards
1.GB 228 Metallic Tensile Test Method
2. GB/T 3620.1 Titanium and Titanium Alloy Number and Chemical Composition
3. GB/T3620.2 Chemical Composition and Allowable Deviation of Titanium and Titanium Alloy Processing Products
4.GB 4698 Chemical analysis methods for sponge titanium, titanium and ferroalloys
3. Titanium plate specifications
Brand: TA1,TA2,TA3,TC4,GR1,GR2,GR5
Standard: GB/T 3621-2007,GB/T 13810-2007ASTM B265,ASTM F136,ASTM F67
Size: T 0.5-5.0mm x W1000mm x L 2000-3500mmT 6.0- 30mm x W1000-2500mm x L 3000-6000mmT 30- 80mm x W1000mm x L 2000mm
4. Usage: Metallurgy, electronics, medical, chemical, petroleum, pharmaceuticals, aerospace, etc.
Hot working state (R) Cold working state (Y) Annealing state (M)
5. Titanium plate manufacturing process
Hot forging: a forging process carried out above the recrystallization temperature of metal.
Hot rolling: a rolling process carried out at temperatures higher than the recrystallization temperature.
Cold rolling: a rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: A metal heat treatment process in which a metal is slowly heated to a certain temperature, held for a sufficient period of time, and then cooled at an appropriate rate (usually slow cooling, sometimes controlled cooling).
Acid washing: Immerse the workpiece in an aqueous solution such as sulfuric acid to remove thin films of oxides and other substances on the metal surface. It is a pre-treatment or intermediate treatment for electroplating, enamel, rolling and other processes.
6. Characteristics of titanium plate
1. Titanium seed plate is a surface oxide film that acts as a good durable and wear-resistant separation agent. Using titanium seed plate saves separation agent, making it easy to peel off the electrode plate and eliminating the need for pre-treatment of the seed plate. Titanium seed plate is half lighter than copper seed plate.
The service life of titanium seed plates is more than three times that of copper seed plates, and can reach 10 to 20 years depending on operating conditions.
3. Electrolytic copper produced from titanium seed plates has a dense crystal structure, smooth surface, and excellent quality.
4. As the titanium seed plate does not require the application of a separating agent, it can avoid contamination of the copper electrolyte.
5. Improve production capacity and reduce the production cost of electrolytic copper, thereby achieving better economic benefits.