Titanium Flange

product details
Titanium flange is a component made of non-ferrous metal titanium or titanium alloy that connects pipes to each other and is attached to the pipe end.
There are holes on the titanium flange, and bolts tightly connect the two flanges. Seal the flanges with gaskets. Flanged pipe fittings refer to fittings with flanges (flanges or flanges).
It can be cast, threaded or welded. A flange joint consists of a pair of flanges, a gasket, and several bolts and nuts. The gasket is placed between the two flange sealing surfaces. After tightening the nut, the specific pressure on the gasket surface reaches a certain value and deforms, filling the uneven areas on the sealing surface to ensure a tight and leak free connection.
Classification of titanium flanges
By connecting components
Titanium flange connection is a detachable connection. According to the connected components, it can be divided into container titanium flanges and pipe titanium flanges.
According to the structural form
According to structural types, there are integral titanium flanges, butt welded titanium flanges, loose fitting titanium flanges, and threaded titanium flanges.
Titanium flange standard
Titanium flange grade: TA0,TA1,TA2,TA3,TA4,TA5,TA6,TA7,TA9,TA10,TC1,TC2,TC3,TC4,TC6,TC11,Grade1 Grade2 Grade5 Grade7 Grade9 Grade12Ti6AL4V ELI,Ti6AL7Nb,Ti13Nb13Zr,Ti1533.
Titanium flange supply status: R or M
Titanium flange specifications: titanium plate 0.03-20mm * 1000mm * 2000mm titanium foil, titanium strip thickness 0.01 to 0.1mm Width 120mm In stock 0.03mm to 0.8mm width from 80 to 500mm titanium rod (light rod) 2mm-250mm * 3000mm titanium tube diameter 3 to 120mm wall thickness from 0.5 to 20mm 4-110mm * 0.8-10mm * 6000mm titanium wire 0.1-8.0mm titanium cake 50mm-500mm * 50mm-1000mm titanium ring diameter 100 to 2020mm wall thickness from 10 to 300mm
Execution standards: GB/T2965,GB/T228,GB/T2039,GB/T3620.1,GB/T3620.2,GB/T4338,GB/T4698,GB/T5168,GB/T5193,GB/T8180,GB/T13810-2007, GB/T2965-2007,ASTM B348, ASTM B381,ASTM F67, ISO5832-2ASTM F136, ISO5832-3, AMS4928, MIL4911,ASTMF1713-08,ASTMF1295,ISO5832-11
state
Annealing state (M) Hot working state (R) Cold working state (Y) (Annealing, ultrasonic testing)
surface
Forged surface, rolled surface, polished surface, polished surface